Silicone Drum Heaters

Silicone drum heaters, double insulated, fitted with a 30-150 deg C thermostat, 2m silicone leads.
Silicone drum heaters, also known as drum heating jackets, provide a simple, effective and reliable way to heat the contents of metal or plastic drums. Supplied with an adjustable thermostat for a control range of 30° to 150° C
Silicone drum heaters are made to: preheat process ingredients, melt material, control viscosity and protect against freezing. They speed the flow of liquids, reduce residue, and promote dissolution. Drum heaters are made of flexible, robust fibreglass reinforced silicon rubber which conforms to the drum.
Two or more drum heaters may be used on the same drum for faster warming, Not for “flammables.” Do not use in explosion hazard areas for metal drums only. For best results, attach near the lower end of the upright drum. Attach to drum only in with filled contents. Do not attach the heater above the liquid level.

• Adhesives (e.g. Hot melt)
• Asphalt/tar/creosote
• Brine
• Chemicals
• Chocolate
• Corn syrup
• Fat/grease/lard
• Finish pretreatment formulations
• Fuel oils
• Glycerin
• Glycol (ethylene, propylene)
• Honey
• Liquid sugar/dextrose/sucrose
• Lubricating oils
• Mastics
• Mineral oil
• Molasses
• Materials vulnerable to freeze damage
• Paints
• Plastics
• Resins (e.g. Polyurethane foam components)
• Solvents (non-flammable)
• Vegetable oils
• Wax

NOTE:

Excessive heat may be harmful to some materials.

Not suitable for plastic drums